// Time checking fixed s.t. user can't enter invalid value -DD 10/10/2007
// Date checking fixed for short, no delimiter fields and for 1 and three digit years -DD 1/25/2005
function emailCheck (email) {
/* The following pattern is used to check if the entered e-mail address
   fits the user@domain format.  It also is used to separate the username
   from the domain. */
var emailStr = email.value
var emailPat=/^(.+)@(.+)$/
/* The following string represents the pattern for matching all special
   characters.  We don't want to allow special characters in the address. 
   These characters include ( ) < > @ , ; : \ " . [ ]    */
var specialChars="\\(\\)<>@,;:\\\\\\\"\\.\\[\\]"
/* The following string represents the range of characters allowed in a 
   username or domainname.  It really states which chars aren't allowed. */
var validChars="\[^\\s" + specialChars + "\]"
/* The following pattern applies if the "user" is a quoted string (in
   which case, there are no rules about which characters are allowed
   and which aren't; anything goes).  E.g. "jiminy cricket"@disney.com
   is a legal e-mail address. */
var quotedUser="(\"[^\"]*\")"
/* The following pattern applies for domains that are IP addresses,
   rather than symbolic names.  E.g. joe@[123.124.233.4] is a legal
   e-mail address. NOTE: The square brackets are required. */
var ipDomainPat=/^\[(\d{1,3})\.(\d{1,3})\.(\d{1,3})\.(\d{1,3})\]$/
/* The following string represents an atom (basically a series of
   non-special characters.) */
var atom=validChars + '+'
/* The following string represents one word in the typical username.
   For example, in john.doe@somewhere.com, john and doe are words.
   Basically, a word is either an atom or quoted string. */
var word="(" + atom + "|" + quotedUser + ")"
// The following pattern describes the structure of the user
var userPat=new RegExp("^" + word + "(\\." + word + ")*$")
/* The following pattern describes the structure of a normal symbolic
   domain, as opposed to ipDomainPat, shown above. */
var domainPat=new RegExp("^" + atom + "(\\." + atom +")*$")


/* Finally, let's start trying to figure out if the supplied address is
   valid. */

/* Begin with the coarse pattern to simply break up user@domain into
   different pieces that are easy to analyze. */
var matchArray=emailStr.match(emailPat)
if (matchArray==null) {
  /* Too many/few @'s or something; basically, this address doesn't
     even fit the general mould of a valid e-mail address. */
	email.focus()
	alert("Email address seems incorrect (check @ and .'s)")
	return false
}
var user=matchArray[1]
var domain=matchArray[2]

// See if "user" is valid 
if (user.match(userPat)==null) {
    // user is not valid
	 email.focus()
    alert("The email username may not be valid.")
    return false
}

/* if the e-mail address is at an IP address (as opposed to a symbolic
   host name) make sure the IP address is valid. */
var IPArray=domain.match(ipDomainPat)
if (IPArray!=null) {
    // this is an IP address
	  for (var i=1;i<=4;i++) {
	    if (IPArray[i]>255) {
	        alert("Destination IP address is invalid!")
			 email.focus()
		return false
	    }
    }
    return true
}

// Domain is symbolic name
var domainArray=domain.match(domainPat)
if (domainArray==null) {
	 email.focus()
	alert("The domain name doesn't seem to be valid.")
    return false
}

/* domain name seems valid, but now make sure that it ends in a
   three-letter word (like com, edu, gov) or a two-letter word,
   representing country (uk, nl), and that there's a hostname preceding 
   the domain or country. */

/* Now we need to break up the domain to get a count of how many atoms
   it consists of. */
var atomPat=new RegExp(atom,"g")
var domArr=domain.match(atomPat)
var len=domArr.length
if (domArr[domArr.length-1].length<2 || 
    domArr[domArr.length-1].length>3) {
   // the address must end in a two letter or three letter word.
    email.focus()
   alert("The address must end in a three-letter domain, or two letter country.")
   
}

// Make sure there's a host name preceding the domain.
if (len<2) {
   var errStr="This address is missing a hostname!"
   email.focus()
   alert(errStr)
   return false
}

// If we've gotten this far, everything's valid!
//return true;
}
//  End checkemail-->
function checkrequired(which) {
var pass=true;
if (document.images) {
for (i=0;i<which.length;i++) {
var tempobj=which.elements[i];
if (tempobj.name.substring(0,8)=="required") {
if (((tempobj.type=="text"||tempobj.type=="textarea")&&
tempobj.value=='')||(tempobj.type.toString().charAt(0)=="s"&&
tempobj.selectedIndex==0)) {
pass=false;
break;
         }
      }
   }
}
if (!pass) {
shortFieldName=tempobj.name.substring(8,30).toUpperCase();
//alert("Please make sure that all fields with asterisks are completed.");
alert("Please make sure the "+shortFieldName+" field is properly completed.");
return false;
}
else
return true;
}

//
<!-- Begin Time Check
//revise to call with Time field object and refocus there -DD 10/11/07
function IsValidTime(timeField) {
	if (ChkTime(timeField.value) == false) {
		timeField.select();
		timeField.focus();
		return false;
	}
	return true;
} 
 
 
////return ChkTime(timeStr);  //test theory of helper function
 
//made helper function -DD 10/10/2007
function ChkTime(timeStr){  
// Checks if time is in HH:MM:SS AM/PM format.
// The seconds and AM/PM are optional.
var timePat = /^(\d{1,2}):(\d{2})(:(\d{2}))?(\s?(AM|am|PM|pm))?$/;

var matchArray = timeStr.match(timePat);
if (matchArray == null) {
alert("Time is not in a valid format.");
return false;
}
hour = matchArray[1];
minute = matchArray[2];
second = matchArray[4];
ampm = matchArray[6];

if (second=="") { second = null; }
if (ampm=="") { ampm = null }

if (hour < 0  || hour > 23) {
alert("Hour must be between 1 and 12. (or 0 and 23 for military time)");
return false;
}
if (hour <= 12 && ampm == null) {
if (confirm("Please indicate which time format you are using.  OK = Standard Time, CANCEL = Military Time")) {
alert("You must specify AM or PM.");
return false;
   }
}
if  (hour > 12 && ampm != null) {
alert("You can't specify AM or PM for military time.");
return false;
}
if (minute<0 || minute > 59) {
alert ("Minute must be between 0 and 59.");
return false;
}
if (second != null && (second < 0 || second > 59)) {
alert ("Second must be between 0 and 59.");
return false;
}
return true;
}
//  End time-->
<!-- Begin
function checkdate(objName) {
var datefield = objName;
if (chkdate(objName) == false) {
datefield.select();
alert("That date is invalid.  Please try again.");
datefield.focus();
return false;
}
else {
return true;
   }
}
function chkdate(objName) {

var strDatestyle = "US"; //United States date style
//var strDatestyle = "EU";  //European date style
var strDate;
var strDateArray;
var strDay;
var strMonth;
var strYear;
var intday;
var intMonth;
var intYear;
var booFound = false;
var datefield = objName;
var strSeparatorArray = new Array("-"," ","/",".");
var intElementNr;
var err = 0;
var strMonthArray = new Array(12);
strMonthArray[0] = "1";
strMonthArray[1] = "2";
strMonthArray[2] = "3";
strMonthArray[3] = "4";
strMonthArray[4] = "5";
strMonthArray[5] = "6";
strMonthArray[6] = "7";
strMonthArray[7] = "8";
strMonthArray[8] = "9";
strMonthArray[9] = "10";
strMonthArray[10] = "11";
strMonthArray[11] = "12";
strDate = datefield.value;
if (strDate.length < 1) {
return true;
}
for (intElementNr = 0; intElementNr < strSeparatorArray.length; intElementNr++) {
if (strDate.indexOf(strSeparatorArray[intElementNr]) != -1) {
strDateArray = strDate.split(strSeparatorArray[intElementNr]);
if (strDateArray.length != 3) {
err = 1;
return false;
}
else {
strDay = strDateArray[0];
strMonth = strDateArray[1];
strYear = strDateArray[2];
}
booFound = true;
   }
}
if (booFound == false) {
if (strDate.length>5) {
strDay = strDate.substr(0, 2);
strMonth = strDate.substr(2, 2);
strYear = strDate.substr(4);
   }else{                              /* DD */
        return false;
    }
}
if (strYear.length == 2) {
strYear = '20' + strYear;
}
else if ( (strYear.length == 1)|| (strYear.length == 3) ){      /* dd */
    return false;
}
// US style
if (strDatestyle == "US") {
strTemp = strDay;
strDay = strMonth;
strMonth = strTemp;
}
intday = parseInt(strDay, 10);
if (isNaN(intday)) {
err = 2;
return false;
}
intMonth = parseInt(strMonth, 10);
if (isNaN(intMonth)) {
for (i = 0;i<12;i++) {
if (strMonth.toUpperCase() == strMonthArray[i].toUpperCase()) {
intMonth = i+1;
strMonth = strMonthArray[i];
i = 12;
   }
}
if (isNaN(intMonth)) {
err = 3;
return false;
   }
}
intYear = parseInt(strYear, 10);
if (isNaN(intYear)) {
err = 4;
return false;
}
if (intMonth>12 || intMonth<1) {
err = 5;
return false;
}
if ((intMonth == 1 || intMonth == 3 || intMonth == 5 || intMonth == 7 || intMonth == 8 || intMonth == 10 || intMonth == 12) && (intday > 31 || intday < 1)) {
err = 6;
return false;
}
if ((intMonth == 4 || intMonth == 6 || intMonth == 9 || intMonth == 11) && (intday > 30 || intday < 1)) {
err = 7;
return false;
}
if (intMonth == 2) {
if (intday < 1) {
err = 8;
return false;
}
if (LeapYear(intYear) == true) {
if (intday > 29) {
err = 9;
return false;
}
}
else {
if (intday > 28) {
err = 10;
return false;
}
}
}
if (strDatestyle == "US") {
datefield.value = strMonthArray[intMonth-1] + "/" + intday+"/" + strYear;
}
else {
datefield.value = intday + " " + strMonthArray[intMonth-1] + " " + strYear;
}
return true;
}
function LeapYear(intYear) {
if (intYear % 100 == 0) {
if (intYear % 400 == 0) { return true; }
}
else {
if ((intYear % 4) == 0) { return true; }
}
return false;
}
function doDateCheck(from, to) {
if (Date.parse(from.value) <= Date.parse(to.value)) {
alert("The dates are valid.");
}
else {
if (from.value == "" || to.value == "") 
alert("Both dates must be entered.");
else 
alert("To date must occur after the from date.");
   }
}
//  End -->
var charexp = /./
var phonexp =  /^\d{10}$/
var pEntryPrompt = "Please enter a "
var pStateCode = "2 character code (like CA)."
var pZIPCode = "5 or 9 digit U.S. ZIP Code (like 94043)."
var pUSPhone = "10 digit U.S. phone number (like 415 555 1212)."
var pWorldPhone = "international phone number."
var pSSN = "9 digit U.S. social security number (like 123 45 6789)."
var pEmail = "valid email address (like foo@bar.com)."
var pCreditCard = "valid credit card number."
var pDay = "day number between 1 and 31."
var pMonth = "month number between 1 and 12."
var pYear = "2 or 4 digit year number."

function isValid(pattern, str) {
	return pattern.test(str)
	}
function hasLetter(str) {	
	return letterexp.test(str)
	}
function hasChar(str) {	
return charexp.test(str)
}
function stripChars(pattern, str) {	
return str.replace(pattern,"")
}
function stripNonDigits(str) {	
return str.replace(/[^0-9]/g,"")
}

function reformat (s)

{   var arg;
    var sPos = 0;
    var resultString = "";

    for (var i = 1; i < reformat.arguments.length; i++) {
       arg = reformat.arguments[i];
       if (i % 2 == 1) resultString += arg;
       else {
           resultString += s.substring(sPos, sPos + arg);
           sPos += arg;
       }
    }
    return resultString;
}
function reformatUSPhone (USPhone)
{   return (reformat (USPhone, "(", 3, ") ", 3, "-", 4))
}
function promptEntry (s)
{   window.status = pEntryPrompt + s
}
function prompt (s)
{   window.status = s
}
function checkphone(phone) {	
	newphone = ""	
	if (hasChar(phone.value)) {
		newphone = stripNonDigits(phone.value)
		notvalid = !isValid(phonexp,newphone)	
		}	
		if (newphone == "" || notvalid) {
		alert("Invalid phone number - please make sure you have the correct number of digits.   	 Omit '1', include the area code")		
		phone.focus()
		return false	
		}	
	//Check that the phone entry is valid by first 
		phone.value = reformatUSPhone(newphone)
		return true

	}
	
function checkString (theField, s, emptyOK)
{   // Next line is needed on NN3 to avoid "undefined is not a number" error
    // in equality comparison below.
    if (checkString.arguments.length == 2) emptyOK = defaultEmptyOK;
    if ((emptyOK == true) && (isEmpty(theField.value))) return true;
    if (isWhitespace(theField.value)) 
       return warnEmpty (theField, s);
    else return true;
}	
//  End -->